Woven geotextile
Category:
Details
Woven geotextile:
It is made of high-strength and low-elongation polypropylene, polyester and other synthetic fiber filaments as raw materials, and is manufactured by special technology. It is wear-resistant, burst-resistant, and has high tensile strength. It is suitable for slope protection, beach protection, and soft soil foundation treatment in rivers, sea channels, coastal seawall catchment areas, and harbors. It is an extremely ideal new material for modern water and soil engineering.
Basic requirements for basic items
|
Project
|
Indicator
|
|||||||||||
|
Nominal breaking strength/(kN/m)
|
35
|
50
|
65
|
80
|
100
|
120
|
140
|
160
|
180
|
200
|
250
|
|
|
1
|
Warp breaking strength/(kN/m) ≥ |
35
|
50
|
65
|
80
|
100
|
120
|
140
|
160
|
180
|
200
|
250
|
|
2
|
Latitudinal breaking strength/（kN/m） ≥ |
According to the agreement, if there is no special requirement, the warp breaking strength is ×0.7
|
||||||||||
|
3
|
Standard strength corresponding elongation/% ≤ |
35 in warp direction, 30 in weft direction
|
||||||||||
|
4
|
CBR breaking strength/kN ≥ |
2.0
|
4.0
|
6.0
|
8.0
|
10.5
|
13.0 |
15.5
|
18.0
|
20.5
|
23.0
|
28.0
|
|
5
|
Equivalent aperture O99 (O99)/mm |
0.05～0.50
|
||||||||||
|
6
|
Vertical penetration coefficient/(cm/s) |
K× (10-2～10-5) where K=1.0～9.9
|
||||||||||
|
7
|
Width deviation/% |
-1.0
|
||||||||||
|
8
|
Mold bag filling thickness deviation/% |
±8
|
||||||||||
|
9
|
Die bag length, width deviation/% |
±2
|
||||||||||
|
10
|
Sewing strength/(kN/m) ≥ |
Nominal breaking strength×0.5
|
||||||||||
|
11
|
Longitude and latitudinal tearing strength/kN ≥ |
0.4
|
0.7
|
1.0
|
1.2
|
1.4
|
1.5
|
1.8
|
1.9
|
2.1
|
2.3
|
2.7
|
|
12
|
Quality deviation per unit area/% |
-5
|
||||||||||
Note 1: The specifications are based on the warp breaking strength. The actual specifications are between the adjacent specifications in the table. The corresponding assessment indicators are calculated by linear interpolation. When the range exceeds the table, the assessment indicators are determined by agreement between the supply and demand parties.
Note 2: When the actual breaking strength is lower than the standard strength, the elongation corresponding to the standard strength is not judged as conforming.
Note 3: The standard values ??of items 7 to 9 and 12 are based on design or agreement.
Product Inquiry
Yizheng Hengying Geotechnical Material Co.,Ltd
Address:Xieji Industrial Park, Yizheng City, Jiangsu Province
Scan to open the mobile website
Stay tuned to us
Copyright:Yizheng Hengying Geotechnical Material Co.,Ltd